AC/DC Current Probe Model, For Use with Model 8345, PEL 112, PEL 113, and PEL 115
Hisco #:E94-65661
MFG #:E94
Item must be ordered in multiples of 1
| Quantity | Price | Save |
|---|---|---|
| 1 | 449.00 | |
| 3 | 433.77 | Save |
AEMC - E94 AC/DC Current Probe
Features and Specifications
- Measurement range (Two selectable): 10 A: 0.1 - 10 A / 100 A: 0.5 to 100 A
- Shielded cord and special 4-point plug termination
- Compact and ergonomic - A perfect companion for hard-to-reach places
- "Zero DC" function - Rest assured that your parameters are saved for future use
- Range Overshoot Indicator
- 10 ft (3 m) Lead length
- Type A current sensor
- Double Insulated
- (Ip) IP20 Ingress Protection
- Fixed jaw, 0.464 in (11.8 mm) Clamping Diameter
- Compatibility: 8345 three-phrase, Class A, Power Quality Analyzer
With cutting-edge Hall-effect technology, the E94 Current Clamp defines the way you measure alternating or direct currents. No interruptions to your installations - no need to cut off the current being measured. The E94 Current Clamp is also equipped with a molded 4-pin connector compatible with the latest-generation PowerPad IV Class A model 8345. When connected, the clamp draws power directly from the instrument, and the specific connector even allows automatic recognition by the instrument itself.
Product Description
AEMC - E94 AC/DC Current Probe
Features and Specifications
- Measurement range (Two selectable): 10 A: 0.1 - 10 A / 100 A: 0.5 to 100 A
- Shielded cord and special 4-point plug termination
- Compact and ergonomic - A perfect companion for hard-to-reach places
- "Zero DC" function - Rest assured that your parameters are saved for future use
- Range Overshoot Indicator
- 10 ft (3 m) Lead length
- Type A current sensor
- Double Insulated
- (Ip) IP20 Ingress Protection
- Fixed jaw, 0.464 in (11.8 mm) Clamping Diameter
- Compatibility: 8345 three-phrase, Class A, Power Quality Analyzer
With cutting-edge Hall-effect technology, the E94 Current Clamp defines the way you measure alternating or direct currents. No interruptions to your installations - no need to cut off the current being measured. The E94 Current Clamp is also equipped with a molded 4-pin connector compatible with the latest-generation PowerPad IV Class A model 8345. When connected, the clamp draws power directly from the instrument, and the specific connector even allows automatic recognition by the instrument itself.
Technical Information
Item must be ordered in multiples of 1