SCS 770146 Gobo Projector, ESD Susceptibility Lens, North American Plug Adapter, 100-240 VAC

The SCS 770146 used for neutralizing electrostatic charges on insulators and ungrounded conductors. Its fast discharge times (< 1.5 seconds at 12 inches) and ±3 volt offset voltage exceed the required limits of ANSI/ESD S20.20 and ESD TR53. The Ion Pro™ Benchtop Ionizer monitors both its offset voltage (balance) and discharge time. The ionizer will alarm should its offset voltage exceed the required limits defined by ANSI/ESD S20.20 or discharge time take longer than 4.5 seconds. Steady-state DC emitters are spaced farther apart to prevent ion recombination, increase decay efficiency, and provide a broader coverage area of ionization. The Ion Pro™ Benchtop Ionizer’s dual-speed fan produces consistent airflow performance. The Ion Pro™ Benchtop Ionizer features a stainless steel enclosure and multi-mount stand to minimize contamination and corrosion when used in clean or sensitive areas.

The SCS Ion Pro™ Benchtop Ionizer operates on Steady-state DC. Steady-state DC systems consist of separate negative and positive ion emitters connected by a pair of  high-voltage cables to their respective high-voltage power supplies. DC power is constantly applied to the emitter points. The ionizer utilizes patented capacitance-based sampling from its internal sensor to continuously adjust the output, maintain its offset voltage, and minimize maintenance.

Features:

• Steady-State DC Benchtop Ionizer with Ion Gauge™ Technology
  Yields optimal neutralization efficiency by utilizing an ion collecting plate to sample both balance and discharge time
• NEW 770128 Power Relay Compatibility
  Controls power to workbenches, hand tools, and other electronic devices dependent on the ionizer’s status
• Dual-balance Sensors
  Applies a resistive sensor to control the balance and a patented capacitive sensor to provide long-term stabilization
• Discharge Time Monitoring
  Alarms if the ionizer requires maintenance due to inefficient neutralization
• Less than 2 Seconds Discharge Time with ±3 Volts Balance
  Meets the ANSI/ESD S20.20 required limits for ionization tested per ANSI/ESD STM3.1 and ESD TR53
• Two Speed Fan
  Performs consistently at all speeds without ion recombination
• Solid Tungsten Emitters
  Resists oxidation and melting to maintain sharp points for optimal ionizer performance
• Stainless Steel Housing and Multi-Mount Stand
  Minimizes foreign object debris, corrosion, and other contaminations when used in clean or sensitive areas
• Ethernet Connectivity
  Provides network communication with Static Management Program (SMP) to collect and report the status for balance and discharge time
• 770047 Benchtop Ionizer Boom Arm Accessory
  Saves workspace by lifting the SCS Ion Pro™ Benchtop Ionizer off the workbench
• NIST Calibrated
  Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.
• Made in the United States of America