Zip-Chem® Cor-Ban® 22 Corrosion Inhibiting Compound, 12 oz. Aerosol

The Zip-Chem 007047 is a maximum penetrating, heavy duty and self-healing film for dissimilar metals.

• The finished coating is soft and self healing
• Cor-Ban® 22 formula is based on the Cor-Ban® 27L CIC
• Provides additional barrier protection for corrosion prone internal steel bores of horizontal pivot shafts and landing gear bogies
• A military approved CIC for stopping corrosion on pre-corroded metal parts
• Highly penetrating formula delivers the corrosion protection of Cor-Ban® 27L into faying surfaces
• Preferred CIC for routine maintenance
• Free of chromates
• Free from heavy metals
• Low toxicity
• Long lasting
• Detectable Film
• > 4000 Hours of Salt Spray
• No Cracking or Flaking to -60°F (-51°C)
• Non-Sagging Film
• Solvent Removable
• Displaces Water
• Package size: 12 oz. Aerosol

• Use on areas that are already corroded and prevent further corrosion from occurring
• Apply by conventional airless or air-operated spray equipment
• Apply over pre-existing corrosion
• The coating can be applied as thin as 1 mil (25 microns) film thickness to achieve the desired corrosion protection
• Aerosol application is available
• The Cor-Ban® 22 aerosol can be used in conjunction with the Formit® extensions to provide targeted spray to areas that may be difficult to reach but need to be coated. Please see our Formit® technical data sheet for more information
• All properties represented were achieved with a wet film thickness of 1.0 mils (25 microns). This wet film thickness can be measured with Zip-Chem® ’s Wet Film Thickness Gauge
• One aerosol can covers approximately 90 ft2 (8.3 m²)
• Paste application of Cor-Ban® 22 is available as Cor-Ban® 27L

• Boeing BMS 3-23 (Meets the requirements)
• NSN 8030-01-523-4290 (16 fl oz (473 ml) Aerosol)
• NSN 8030-01-531-7352 (5 Gallon (18.9L) Pail)
• T.O. 1C-130A-23 (Called out)
• T.O. 1C-5A-23 (Called out)