LONER® ESD-Safe Adjustable Temperature Soldering Iron with Deluxe Stand and LT375 Tip
Hisco #:930-15970
MFG #:930
Item must be ordered in multiples of 1
The EDSYN 930 Ultra Cutter kit comes with 7/8 to 2-1/2 inches cutters, two small arbors, sizes 7/8 and 1-1/8 inches, for use with smaller cutters, large arbor, hex wernch, and a rugged plastic case.
Greenlee has been going strong for more than 145 years and continues to be the preferred brand of tools and equipment for the electrical contractor. From hole making and bending to test and measurement, you can depend on Greenlee tools to outlast and outperform the competition every time. This Greenlee Ultra Cutter is made of high-speed steel. It lasts 10 times longer than a standard hole saw. It is also precision ground teeth cut smooth, burr free holes with ease. Its durability and speed provide a low cost with each hole. Its split-point pilot drill prevents walking and makes accurate hole placement every time. The spring loaded slug ejector saves time and no tool is required to change the cutter sizes. This cutter provides a less chance of broken teeth because the saw body is machined out of solid, high-speed steel.
Lowers cost per cut:
Greenlee Ultra Cutters are machined from solid, high-speed steel adding durability and speed while reducing broken teeth and lowering the cost per cut. Kit comes with 6 cutters for conduit sizes 1/2 through 2 inches.
Include split point pilot drill:
All three arbors included in this kit feature a split point pilot drill that prevents walking and makes accurate hole placement easy. Greenle arbors save time on the jobsite by allowing for easy cutter changes with no tool required. Compatible with all power tools: Greenlee Ultra Cutters have capacity of 1/4 inch (6.35 millimeter) and are compatible with all standard power tools.
- Lasts 10 times longer thans tandard hole saws
- Precision-ground teeth cutsmooth, burr-free holes with ease
- 1/4 IN (6.35 mm) capacity
- Durability and speed provide low cost per hole
- Split-point pilot drill prevents "walking" - makes accurate hole placement easy
- Spring-loaded slug ejectorsaves time
- No tool required to change cutter sizes
- Less chance of broken teeth because the saw body is machined out of solid, high-speed steel
Product Description
The EDSYN 930 Ultra Cutter kit comes with 7/8 to 2-1/2 inches cutters, two small arbors, sizes 7/8 and 1-1/8 inches, for use with smaller cutters, large arbor, hex wernch, and a rugged plastic case.
Greenlee has been going strong for more than 145 years and continues to be the preferred brand of tools and equipment for the electrical contractor. From hole making and bending to test and measurement, you can depend on Greenlee tools to outlast and outperform the competition every time. This Greenlee Ultra Cutter is made of high-speed steel. It lasts 10 times longer than a standard hole saw. It is also precision ground teeth cut smooth, burr free holes with ease. Its durability and speed provide a low cost with each hole. Its split-point pilot drill prevents walking and makes accurate hole placement every time. The spring loaded slug ejector saves time and no tool is required to change the cutter sizes. This cutter provides a less chance of broken teeth because the saw body is machined out of solid, high-speed steel.
Lowers cost per cut:
Greenlee Ultra Cutters are machined from solid, high-speed steel adding durability and speed while reducing broken teeth and lowering the cost per cut. Kit comes with 6 cutters for conduit sizes 1/2 through 2 inches.
Include split point pilot drill:
All three arbors included in this kit feature a split point pilot drill that prevents walking and makes accurate hole placement easy. Greenle arbors save time on the jobsite by allowing for easy cutter changes with no tool required. Compatible with all power tools: Greenlee Ultra Cutters have capacity of 1/4 inch (6.35 millimeter) and are compatible with all standard power tools.
- Lasts 10 times longer thans tandard hole saws
- Precision-ground teeth cutsmooth, burr-free holes with ease
- 1/4 IN (6.35 mm) capacity
- Durability and speed provide low cost per hole
- Split-point pilot drill prevents "walking" - makes accurate hole placement easy
- Spring-loaded slug ejectorsaves time
- No tool required to change cutter sizes
- Less chance of broken teeth because the saw body is machined out of solid, high-speed steel
Technical Information
Additional Resources
Item must be ordered in multiples of 1