Documenting Process Calibrator for All Common Process Paramenter

The Fluke FLUKE-753 is a documenting process calibrator.

• Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
• Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
• Power transmitters during test using loop supply with simultaneous mA measurement
• Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
• Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
• Holds up to a full week of downloaded procedures and calibration results
• Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc
• Easy to use
• Three year warranty
• Bright white dual display
• Multi lingual interface
• Rechargeable Li-Ion battery for 10 hour uninterrupted use. Includes gas gauge
• Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms
• Delivered with DPC/Track Sample software
• Compatible with many Asset Management software packages

DC voltage measurement/accuracy
100 mV	0.02% + 0.005 mV
3 V	0.02% + 0.00005 V
30 V	0.02% + 0.0005 V
300 V	0.05% + 0.0 V
AC voltage measurement/accuracy
3 V(40 Hz to 500 Hz)/0.001 V	0.5% + 0.002 V
30 V(40 Hz to 500 Hz)/0.01 V	0.5% + 0.02 V
300 V(40 Hz to 500 Hz)/0.1 V	0.05% + 0.2 V
DC current measurement/accuracy
30 mA	0.01% + 5 µ A
110 mA	0.01% + 20 µ A
DC resistance measurement/accuracy
10Ω	0.05% + 50 mΩ
100Ω	0.05% + 50 mΩ
1 kΩ	0.05% + 50 mΩ
10 kΩ	0.1% + 10 Ω
DC frequency measurement/accuracy
1.0 to 110 Hz / 0.01 Hz	0.05 Hz
110.1.0 to 1100 Hz / 0.01 Hz	0.5 Hz
1.101 to 11.0 kHz / 0.01 kHz	0.005 kHz
11.01 to 50 kHz / 0.001 kHz	0.05 Hz
DC voltage source/accuracy
100 mV	0.01% + 0.005 mV
1.0 V	0.01% + 0.00005 V
-15 V	0.01% + 0.01& + 0.0005 V
DC current source/accuracy
22 mA	0.01% + 0.003 mA
DC resistance source range
10Ω	0.01% + 10 mΩ
100Ω	0.01% + 20 mΩ
1 kΩ	0.02% + 0.2 Ω
10 kΩ	0.02% + 3 Ω
DC frequency source/accuracy
0.1 to 10.99 Hz	0.01 Hz
0.01 to 10.99 Hz	0.01 Hz
11.0 to 109.99 Hz	0.1 Hz
110.0 to 1099.9 Hz	0.1 Hz
1.10 to 21.999 kHz	0.002 kHz
22.0 to 50 kHz	0.005 kHz